C2D1 series

C2D1 series Feature: * High capacity and applicable for commercial scale * Because the output votlage is adjusted, it is available in both single point / multipoint Specifications Rated capacity 980.7 N { 100 kgf} - 7.845 kN { 800 kgf} Safe overload 150 % R.C. Ultimate overload 200 % R.C. Rated output 2 mV/ V( + 0.004, -0) mV/ V Non-linearity 0.02 % R.O. Hysteresis 0.02 % R.O. Repeatability 0.02 % R.O. Creep 0.025 % R.O./ 20 min Creep recovery 0.025 % R.O./ 20 min Excitation, recommended 12 V or less Excitation, maximum 16 V Zero balance ± 0.1 mV/ V Input resistance 420 © ± 40 © Output resistance 350 © ± 3 © Insulation resistance 2 000 M© or more ( DC50 V) ( between bridge and main body) Temp. range, compensated -10' C to 50' C Temp. range, safe -20' C to 70' C Temp. effect on zero 0.05 % R.O./ 10' C Temp. effect on output 0.02 % LOAD/ 10' C Cable Æ 6.3, 4-cores shielded 6 m cable directly attached, Y-crimp type terminal lugs are attached at cable end. Class of protection IP65 Material of element Alluminium alloy Durability 1 000 000 times with rated load applied. Effect of eccentric load - The size of loading plate : 450 mm x 650 mm at maximum. - The center of loading plate and also the center of load cell should be the same position. - Error is within 0.02 % R.O. applied with 1/ 2 of rated capacity at the position of 200 mm of eccentricity.